EUROMAP's Global Plastics Flow Study 2023 was released in October 2025 and covers 45 countries representing 81% of global GDP. It is essentially a full-lifecycle material flow analysis, tracking plastics from raw material production through conversion, consumption, waste generation, collection, recycling, incineration, landfill and leakage into the environment. The core findings are summarised below.
Table 1 — Global plastics flows, 2023
表格
| Indicator | Volume |
|---|---|
| Annual plastics production | 414 million tonnes |
| Fossil-based share of production | 374 million tonnes |
| Plastic products entering the market | 407 million tonnes |
| Post-consumer plastic waste generated | 300 million tonnes |
| Waste managed in an environmentally sound way | 212 million tonnes (71%) — landfill 97 Mt, incineration with energy recovery 64 Mt, collected for recycling 51 Mt |
| Waste mismanaged | 87 million tonnes (29%) |
| Recyclate actually produced | 37 million tonnes |
| Actual (output-based) recycling rate | 12% |
| Recyclate as a share of annual plastics output | 9% |
1. ProductionGlobal plastics production stands at 414 million tonnes a year, of which 374 million tonnes is fossil-based. Some 407 million tonnes of plastic products enter the market. Output has risen steadily over the five years since 2018, when production was 370 million tonnes, driven by higher per-capita plastics consumption.
2. Waste generationA total of 300 million tonnes of post-consumer plastic waste is generated each year (the study counts only waste arising after consumer use; industrial scrap is excluded).
3. Where the 300 million tonnes goes71% (212 million tonnes) is managed in an environmentally sound way:
The remaining 29% (87 million tonnes) is mismanaged — open dumping, uncontrolled burning and littering — with part of it eventually leaking into soil, rivers and oceans.
4. Real recycling efficiencyAlthough 51 million tonnes is taken in by recyclers, sorting, contaminant removal and processing losses mean that only 37 million tonnes is actually converted into recycled material. The global actual recycling rate is therefore just 12%, and recyclate accounts for only 9% of total plastics output in the year.
In short: only about one-tenth of the world's plastic waste ends up as new plastic; most is landfilled or incinerated.
1. EuropeWaste: 50.1 million tonnes. Environmentally sound management rate: 88%, the highest in the world. Actual recycling rate: 27%. Recycling systems within the EU are mature, but littering and open burning in Turkey and non-EU Eastern European countries are significant and drag down the regional average. Europe also still exports plastic waste to countries with weaker waste governance.
2. Asia (including China)Waste: 148.2 million tonnes, the largest volume of any region. Environmentally sound management rate: 69%. Total collected for recycling: 28.4 million tonnes, the highest in the world, yet the recycling rate is only 19%. Sorting technology varies widely, informal recycling workshops are widespread and processing losses are relatively high. China is the core source of Asia's recycling volume.
3. North AmericaWaste: 46.1 million tonnes. Environmentally sound management rate: 96%, but achieved mainly through landfill; the recycling share is very low, reflecting weaker household recycling habits.
4. AfricaWaste infrastructure is severely lacking. Per-capita mismanaged waste is the highest in the world, and open dumping and open burning are the most acute. Many areas have no proper landfill sites.
5. Latin AmericaThe pattern is close to North America: landfill dominates, incineration capacity is insufficient, and recycling is at a moderate level.
1. Packaging is the main source of waste.Packaging plastics have the shortest service life and are discarded after use, so they account for the largest share of waste and are the main target for recycling (PE, PP and PET). Film-based plastics, however, carry heavy contamination and suffer very high recycling losses.
2. Construction, automotive and appliance plastics have long cycles.Plastics used in building materials and vehicles have service lives of 10–30 years. Plastic consumed in 2023 will not become waste that year; it will do so many years later. The consequence: production keeps rising now, and waste volumes will keep climbing for decades to come.
3. PVC and PS are hard to recycle.Additives limit the recycling of PVC, so it is more often incinerated or landfilled.
The core problem: plastics production is growing faster than recycling systems are being built. Technology gaps and high recycling costs mean progress towards a circular economy remains slow.
1. Structural problems differ by income level.In developed economies the main issues are weak recycling participation and heavy reliance on landfill; in developing economies they are inadequate waste collection infrastructure and the prevalence of informal recycling. Technology upgrades alone will not solve either problem.
2. Practical measures
3. ConclusionWithout stronger, globally harmonised policy, the share of recycled plastic is unlikely to rise significantly for a long time.
Source: China Plastics Machinery (中国塑机), published via 86pla.com (Plastics Machinery Network) on 13 July 2026. Original article: EUROMAP 全球塑料流动研究报告内容摘要