How to Match a Blown Film Machine to Agricultural Film Requirements

How to Match a Blown Film Machine to Agricultural Film Requirements

Update Date: 18 November 2026

The ABA/AB blown film machine suits agricultural film production where three-layer co-extrusion, recycled material in the middle layer, and a selected film width are part of the process. Match the model to film width, thickness, output, raw material, and die requirements before ordering.

Illustration: How to Match a Blown Film Machine to Agricultural Film Requirements
Illustration for reference; see the product page for actual photos and specifications.

Agricultural film production starts with a clear match between the film you need and the machine configuration you buy. Our ABA/AB blown film machine uses three-layer co-extrusion, with recycled material used in the middle layer, and the product line covers film widths from 1000 mm to 3000 mm across its listed models.

Start with the film width and thickness

Film width is the first integration check because it narrows the suitable model range. The listed configurations cover widths from 1000-1400 mm/1600 mm through 2000-3000 mm. The LDPE film thickness range is 0.02-0.15 mm.

ModelFilm widthLDPE film thicknessOutput
65/65-1600/18001000-1400 mm/1600 mm0.02-0.15 mm100-250 kg/h
75/75-2200/24001200-2000 mm/2200 mm0.02-0.15 mm120-300 kg/h
90-90/2600/28001400-2400 mm/2600 mm0.02-0.15 mm140-420 kg/h
100-100/32002000-3000 mm0.02-0.15 mm160-500 kg/h

Choose the 65/65 configuration for narrower agricultural film within its listed width range. Move to the 75/75, 90-90, or 100-100 configuration when your required film width and output fall into those model ranges. Output changes with film width, thickness, die size, and raw material characteristics, so use your actual film specification when confirming the configuration.

Check the material plan for the ABA structure

The three-layer layout fits production plans that place recycled material in the middle layer. The listed raw materials include HDPE, LDPE, LLDPE, CACO3, and recycled materials. This makes the machine relevant when your agricultural film formula requires a combination of these materials across the three layers.

The line uses two main motors for three-layer extrusion. Screw configurations range from Φ65/65 to Φ100/100, with a 32:1 screw L/D ratio and force feeding. Match the screw and feeding arrangement to the resin and filler mix you plan to process, then confirm the selected model against the material characteristics.

Match the die and traction arrangement to the line layout

Die diameter increases across the listed configurations, from Φ350 mm on the 65/65 model to Φ750 mm on the 100-100 model. We can configure the machine with a rotary die or a horizontal traction rotary system. These choices matter when the required film width, bubble handling, and downstream winding layout must fit the rest of your line.

The control arrangement is fully automatic system control. The equipment also includes temperature control across the extruders, monitoring for motor load and screw speed, alarms for temperature deviations or pressure spikes, and die-gap adjustment for film thickness uniformity. Use these functions as integration checkpoints when reviewing the control and quality requirements of your agricultural film process.

Our advice

Choose the model by width and output first, then check screw size, die diameter, traction layout, and available line space. Output changes with width, thickness, die size, and raw material characteristics.

What to weigh

Film matchcompare required width, LDPE thickness, and output with the model range.
Material plancheck the resin, filler, and recycled-material mix for the three-layer layout.

Your shortlist

ABA/AB blown film machineagricultural film lines using three-layer co-extrusion and a recycled middle layer.

Select the configuration that fits your production target

The ABA/AB blown film machine for agricultural film suits production that needs agricultural film with ABA three-layer co-extrusion and a recycled middle layer. Select the configuration by checking these points together:

  • Required film width against the model's width range
  • LDPE thickness and target output
  • Screw diameter, die diameter, and traction arrangement
  • Available line space for the selected configuration

Send the target film width, thickness, raw material mix, output requirement, die preference, and traction layout with your inquiry so we can match the configuration to your production line.

The company

Chengheng Plastic Machinery Co., Ltd.

Chengheng Plastic Machinery Co., Ltd. located in the northern China plastic processing and distribution center–Ningjin plastic industrial zone, we are far from 350km from Beijing city, Half hour to Shijiazhuang city of Hebei province capital. Traffic is very convenient. You can reach to us by plane, high speed train from Beijing, Shanghai, Hangzhou, Guangzhou. We are professional in various plastic flexible packaging machine, such as plastic film blowing machine, bag making machine, printing machine and so on.…

About Us ↗Visit company website ↗
blown film companies
Request a Quote
We're here to help and answer any question you might have. We look forward to hearing from you.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.